HLHS01-Horizontal (In-line) Type Fiber Optic Splice Closure

Description:

The closure is widely used to connect and branch optic cable fibers in the aerial, pipeline and direct buried applications. Adopt silica rubber sealing way, which can reopen. With optional valve and ground feed-through lug. Designed with simple inner structure, easy installation and reopen, is the best choice for network construction

Materials : PP  alloy or  ABS

fiber radius of curvature≥40mm

Sealing method: mechanical Seal

Features:

1.Made of high quality stainless steel screws and accessories; Silica rubber seal, with excellent sealing performance and easy installation.

2.Adequate splice space with bending radius>37.5mm

3.No special training is needed. Easy install and reopen

4.The closure is made of high qualified plastic with aging - resistant and anti-UV materials. Good quality and long service life

5.With various cable fixing rings,fit for different cable dimensions

Technical Parameter:

1. Working Temperature: -40 degrees centigrade~+75 degrees centigrade

2. Atmospheric Pressure: 62~106Kpa

3. Axial Tension: >1000N/1min

4. Stretching Resistance: 2500N/10 square centimetre(1min)

5. Insulation resistance: >2*104MΩ

6. Voltage Strength: 15KV/1min, no arcover or breakdown

7.Temperature cycle:-40℃ ~+65℃ , Inner Pressure: 60(+5) kPa,

Cycle:10 times, the decrease of pressure can't exceed 5kPa at

room temperature

8.Durability: 25 years