Product Description
Hanlan's ROC drop cable assembly with
factory-terminated, environmentally sealed and hardened connectors to
reduce the cost and time of drop cable deployment.
The Optitap hardened connectors provide superior durability and
reliability in the drop segment of the network. This assembly also
offers significant improvements in cable management. By featuring the
ROC drop cable design, issues of slack storage capacity are virtually
eliminated. The ROC drop cable minimum bend radius is half the size of
legacy drop cable. The outer dimensions of the cable have been reduced
by more than50%. ROC drop cables are more flexible, allowing for easier
routing at the ONT. Installers will see a reduction in truck storage
space requirements with this new design.
Features
Compatible with Corning-OptiTap and H-Connector;
Factory terminated for high performance;
Available with one or both ends connectorized;
Hybrid (one end with an OptiTap Connector, one end with standard SC connector) available with or without pulling grip;
Available in dielectric or toneable;
Designed for aerial, direct-buried or duct installation;
Reduced optimized cable cross-section ;
-40℃~85℃ operating temperature;
Specification
Product name | ROC drop cable assembly |
Cable Type | dielectric or Toneable |
Cable diameter | 3.0mm*6.6mm tonable ROC cable |
Application | Aerial , Direct Buried , Duct |
Termination | Both end or one end |
Specifications - Connector A | |
Reflectance, Typical | -65 dB |
Insertion Loss, Typical | ≤ 0.15 dB |
Connector Type | SC/APC OptiTap connector(H Connector) |
Specifications - Connector B | |
Reflectance, Typical | -65 dB |
Insertion Loss, Typical | ≤ 0.15 dB |
Connector Type | SC APC Connector (simplex) with 2.0mm or 2.9mm leg |
Optical Characteristics | |
Fiber Type | Single-mode |
Fiber count | 1F |
Fiber Category | G.652.D |
Wavelengths | 1310 nm / 1550 nm |
Maximum Attenuation | 0.35 dB/km / 0.25 dB/km |
Application
FTTH;
Outdoor Areas;
Harsh Environment.