Product Description
OptiTap-SC/APC Patch Cord is factory-terminated, environmentally sealed and hardened connectors to reduce the cost and the time of drop cable deployment in optical access networks. The OptiTap single-fiber cable assembly is specifically designed to significantly reduce required drop cable installation.
Features
Compatible with Corning-OptiTap and H-Connector;
Factory terminated for high performance;
Available with one or both ends connectorized;
Hybrid (one end with an OptiTap Connector, one end with standard SC connector) available with or without pulling grip;
Available in dielectric or toneable;
Designed for aerial, direct-buried or duct installation;
IP-68 water and dust protection ;
-40℃~85℃ operating temperature;
Specification
Product name | 5.0mm Optitap patch cord |
Cable Type | 5.0mm double sheath cable |
Cable diameter | 5.0mm round cable |
Application | Aerial , Direct Buried , Duct |
Termination | Both end or one end |
Specifications - Connector A | |
Reflectance, Typical | -65 dB |
Insertion Loss, Typical | ≤ 0.15 dB |
Connector Type | SC/APC OptiTap connector(H Connector) |
Specifications - Connector B | |
Reflectance, Typical | -65 dB |
Insertion Loss, Typical | ≤ 0.15 dB |
Connector Type | SC APC Connector (simplex) with 2.0mm or 2.9mm leg |
Optical Characteristics | |
Fiber Type | Single-mode |
Fiber count | 1F |
Fiber Category | G.652.D |
Wavelengths | 1310 nm / 1550 nm |
Maximum Attenuation | 0.35 dB/km / 0.25 dB/km |
Application
FTTH;
Outdoor Areas;
Harsh Environment.