Installation steps of stainless steel banding 

1.Pull the stainless steel banding out of the plastic box and put on a corresponding size.

2.Wrap the stainless steel strapping around the binding object and use the stainless steel strapping tool,
the binding head is bent and pressed under the buckle.

3.Put the extra part of the stainless steel strapping into the tool STTA opening,hold the tool STTA handle in the right hand and do the swing action repeatedly,until the stainless steel strapping is tightened.

4.After the stainless steel strapping is tightened,then pushes up the stainless steel strapping tool STTA .Reverse the pressure on the buckle.

5.Move the blade with the left hand to cut off the stainless steel strapping.

6.remove the stainless steel strapping tool STTA after the stainless steel strapping is cut off and hit the buckle with the hammer on both ear clips,thus a stainless steel strapping is installed.