How to enter the fiber of ODF distribution frame?

2021-05-11

ODF optical fiber distribution frame is an optical fiber distribution equipment specially designed for optical fiber communication equipment room. It has optical cable fixing and protection functions, optical cable termination function and wire adjustment function, and is an indispensable part of information equipment room. Today, let's talk about how to enter the optical fiber of the ODF distribution frame?

1. Strip the fiber optic cable and fix the fiber optic cable to the fiber tray

Common optical cables are stranded, skeleton and central bundle tube optical cables. Different optical cables need to take different stripping methods. After stripping, the optical cables must be fixed to the fiber tray.

2. split the fiber, pass the fiber through the heat shrinkable tube

Different bundle tubes and optical fibers of different colors are separated and passed through the heat shrinkable tube. After the fusion splicing is completed, a heat shrinkable tube can be used to protect the optical fiber fusion splice.

3. Turn on the power of the fusion splicer and select the appropriate splicing method.

The power supply of the fusion splicer has two kinds of AC and DC, which should be switched on and off reasonably according to the type of power supply.

4. prepare fiber end face

The quality of the fiber end face will directly affect the splicing quality, so a qualified end face must be made before fusion splicing.

5. Place the optical fiber

Place the optical fiber in the V-shaped groove of the fusion splicer, and carefully press the fiber clamp and the fiber clamp. The position of the optical fiber in the clamp should be set according to the cutting length of the fiber, and the fiber should be placed in the windshield correctly.

6. connect optical fiber

After pressing the splicing button, the fibers move towards each other. During the movement, a short electric discharge is generated to clean the surface of the fiber. When the gap between the fiber end faces is suitable, the splicer stops moving towards each other, sets the initial gap, measures by the splicer, and displays the cutting angle.

7. coil fiber and fix

Put the spliced optical fiber tray on the optical fiber receiving tray, fix the optical fiber, receiving tray, splice box, terminal box, etc., and complete the optical fiber fusion splicing of the ODF distribution frame.

If you need more information or support on Fiber Optic ODF distribution frame products, please don’t hesitate to contact usEmail:info@hanlan-tech.com, we will try our best to support you.



Welcome to our Factory

Send Your Inquiry

A reliable partner for your cable requirements
0086 18073118925
No.318, Wanjiali Road, Yuhua District, Changsha, Hunan, P.R.China, 41000