GJYXFCH self-support Flat Drop Cable

Category:

Drop cables are located on the subscriber end to connect the terminal of a distribution cable to a subscriber’s premises. They are typicality small diameter, low fiber count cables with limited unsupported span lengths, which can be installed aerially, underground or buried. As it is used in outdoor, drop cable shall have a minimum pull strength of 1335 Newtons according to the industry standard. Drop cables are available in many different types.

 

Flat Type Drop Cable, also known as flat drop cable, with a flat out-looking, usually consists of a polyethylene jacket, several fibers, and two dielectric strength members to give high crush resistance.

 

Figure-8 Aerial Drop Cable is a self-supporting cable, with the cable fixed to a steel wire, designed for easy and economical aerial installation for outdoor applications.

 

Round Drop Cable usually contains a single bend-insensitive fiber buffered and surrounded by dielectric strength members and an outer jacket, which can provide durability and reliability in the drop segment of the network.

 

FEATURES

Good mechanical and environmental characteristics;

Flame retardant characteristics meet the requirements of relevant standards;

The mechanical characteristics meet the requirements of relevant standards;

Soft, flexible, easy to splice, and with big capacity data transmission;

Meet various requirements of the market and clients.

FTTH Drop Cable

Applicable fields :

1. widely used for FTTA/FTTH/FTTB installation

2. Data cable in distribution networks

 

Advantages of our fiber optic cable:
1. Good supply capacity(100KM-200KM each day)
2. Fast delivery time
3. Complied to ISO9001 quality system
4. 100% testing before shipment
5. self support type or not self support type for option
6. indoor and outdoor for option
7. armored and non-armored Cable for option

Mechanical and Environmental Characteristics

itemsunitSpecifications
Allowable tensile loadN3000
Crush resistanceN/10mm1000
Min. Bend Radius(Dynamic)mm20D(OD)
Min. Bend Radius(Static)mm10D
Installation Temperature-40~+60
Operating Temperature-40~+70
Storage Temperature-40~+60

 

Send Your Inquiry
Send 
close-image
language »